An LG Soundbar is a long, modern speaker that gives you a powerful surround sound experience right at home. So that the soundbars can meet these needs, they are made with advanced technology.
Soundbars can sometimes make people’s entertainment time both mesmerizing and annoying. They have a lot of reasons to be angry about these problems.
If the sound cuts out while you’re watching a movie or listening to music on your day off, it will be very annoying. If the sound keeps cutting out, you’ll get more and more upset.
This is a common problem that can be fixed with a few simple tricks. You can fix this problem at home in a few minutes without the help of a technician.
LG says that there are two main reasons for these kinds of problems. Your wireless connection might be slow because there’s too much wireless traffic or because the software on your soundbar is out of date.
There are three basic ways to solve these problems. By doing what’s written below, you’ll be able to fix the problem.
Why does my soundbar cut out in this regard?
The wireless subwoofer is not making any noise. The sound from a wireless subwoofer can be cut off if there is interference or something in the way between the soundbar and the subwoofer. If your soundbar isn’t sending a good signal to your subwoofer, make sure the problem is with the source of the sound.
How do I reset my LG home theater?
To do this, you have to press the number 0 on the remote control at the same time as the stop button on the main unit. Hold for five seconds, or until E2P CLR shows up. Your device has been set back to how it was when it came out of the box.
How to Update Software of LG Soundbar?
First, you have to get the software update. This is not possible from the sound bar itself. A USB cable must be used to move the file from your computer to the soundbar. Here’s what you need to do to get the software update:
- Start your web browser, like the Google Chrome browser, on your laptop.
- Go to LG’s website, www.LG.com, and click on “Support” and then “Software and Drivers.”
- In the search box, type the model name of your LG soundbar.
- When the software update is ready, pop-up windows will show up.
- Get the most recent version.
Once you’ve downloaded the file, you’ll need to get it ready for the soundbar. The following steps are needed to update the soundbar:
- The first step is to change the file’s name so that it matches the name of the model and the module. You should write update module, then an underscore, and then the name of the model.
- After you plug the USB into your computer, install the FAT32 file system on it.
- Put the SW file on your USB.
- When you connect the USB to your soundbar, the word “UPGRADE” will show up on the screen.
- When you press the play button on the soundbar’s remote, the update will begin to be installed.
- As soon as the update is done, the soundbar will turn off.
At this point, the update will have been put in correctly. The soundbar will no longer cut off sound. You can enjoy your music and entertainment to the fullest again, without any delays or problems.
When updating software in this way, you need to be careful about a few things. If you don’t take these precautions, you could even damage the software on your soundbar, which would cause it to stop working at all.
- Software update files need to have the right names changed for them to work.
- Before any files can be copied, the FAT32 system file must be formatted.
- During the update, you can’t turn off your device.
Conclusion
If your LG soundbar keeps cutting out, you can fix the problem with the steps above. Since the problem happens often, you won’t have to worry too much about it as long as you follow a few simple steps. Still, it’s important to take the precautions seriously so you don’t damage your soundbar.